mixing console 2 mono + 2 stereo inputs, USB player, audio interface, 48V phantom power, delay
DI box passive, with parallel out, ground lift, 20db or 40db attenuation
DI box active 9Volt, with parallel out, ground lift, 20db or 40db attenuation
instrument cable for GWS-61B beltpack, with 3 pin mini xlr connector and 6.3mm jack
dynamic microphone, frequency response 80hz-16khz, cable included
dynamic microphone professional quality, frequency respons 40hz-20khz, cable included
popscreen on gooseneck
microphoneholder, spring clamp model, also for wireless microphones
microphoneholder, rubber tapered 21,5mm
microphoneholder, rubber tapered 28,5mm
windscreen for shotgun microphone, interior Ø: 19 mm.
windscreen balltype, standard, 5 pcs, height 68, diameter 35/65, black
windscreen balltype, standard, 5 pcs,height 68, diameter 35/65, blue
windscreen balltype, standard, 5 pcs,height 68, diameter 35/65, red
windscreen balltype, standard, 5 pcs,height 68, diameter 35/65, yellow
windscreen balltype, standard, 5 pcs,height 68, diameter 35/65, orange
windscreen small balltype, height 64, diameter 25/45, black
professional monitoring headphones, large earpads, adaptor jack
distribution block in aluminum box, 1 x sdc-850 and 7 x SCHUKO chassisd,
distribution unit in metal box, 1 x sdc-850 and 8 x vimar chassis parts
distribution unit in metal box, 1 x sdc-850 and 8 x euro chassis parts
distribution unit in metal box with sdc-802, 1 x sdc-850 and 7 x euro chassis parts
distribution unit in metal box with sdc-802, 1 x sdc-850 and 7 x vimar chassis parts
distribution unit in metal box with sdc-810, 1 x sdc-850 and 7 x vimar chassis parts
installation switch, 4 pole, 415v 16a 6,0, 4p
installation switch, 4 pole, 415v 25a 6,0, 4p
earth switch (e,l.c.b.) 2 pole, 250 Volt 16a 0,0
earth switch (e,l.c.b.) 2 pole, 250 Volt 63a 0,0
earth switch (e,l.c.b.) 4 pole, 415v 25a 0,3
earth switch (e,l.c.b.) 4 pole, 415v 32a 0,3
earth switch (e,l.c.b.) 4 pole, 415v 63a 0,3
earth switch (e,l.c.b.) 4 pole, 415v 125a 0,3-05
switch for voltmeter, 6 positions
switch for Amperewither, 4 positions
transformer for Ampere meter, 50amp
transformer for Ampere meter, 100amp
transformer for Ampere meter, 150amp
digital voltmeter, 0-600v
digital frequency meter, 40, 80hz, 115-230v
stagebox, junction box with sox-19-mp and 6 sdc-840
din module with green lamp, 220v 0,3w
lighting bar with wiring, 150x8x4cm, for 8 lights with harting cn-10-psp and 8 sdc-840
lighting bar with wiring, 150x8x4cm, for 8 lights with harting cn-16-psp and 8 cables
lighting bar with wiring, 150x8x4cm, for 8 lights with 2 harting cn-10-psp and 4 cables
lighting bar with wiring, 225x8x4cm, for 6 lights with 2 harting cn-16-psp and 6 cables
lighting bar with wiring, 50x8x4cm, for 4 lights with harting cn-10-psp and 4 sdc-840
lighting bar with wiring, 100x8x4cm, for 8 lights with harting cn-16-psp and 8 sdc-840
lighting bar with wiring, 75x8x4cm, for 6 lights with sox-19-mp and 4 sdc-840
lighting bar with wiring, 150x7,5cm, for 4 lights with sox-16-mp and 4 cables
lighting bar with wiring, 230x7,5cm, for 6 lights with sox-19-mp and 6 cables
lighting bar with wiring, 230x7,5cm, for 6 lights with sox-19-mp aan uiteinde+6 cables
19 inch paneel, dimmer to lighting bar, 2 ean dwith 1 x cn-16-psp en 8 cables 50cm
filterholder, for plc-36 armatuur, black
filterframe, for par 16, black
filterframe, for par 16, aluminium
lightingcable, black, 1 meter, 19 x 2,5mm, 1 x cn-10-ppv and 4 x sdc-852
lightingcable, black, 1 meter, 19 x 2,5mm, 1 x cn-16-ppv and 8 x sdc-852
lightingcable, black, 1 meter, 19 x 2,5mm, 1 x sox-19-fv and 6 x sdc-852
lightingcable, black, 10 meter, 19 x 2,5mm, 1 x sox-19-fv and 6 x sdc-852
hinge strip, 3.5 m, plated st., building model
hinge with lid support, 2 pcs, nickel plated, 106 X 106 mm
hinge with lid support, 2 pcs, nickel plated, 127 X 274 mm
adjustable arm, 2 pcs, plated, 14,1-31,3 mm.
close profile, "U" model, price per meter, aluminum, 4.5 mm, 3 meter total
leg for flight-case, 4 pcs male model, galvanized steel 64 x 64 mm
leg for flight-case, 4 pcs female model, galvanized steel 64 x 64 mm
guarantee for safety cable
spare part, tube collar nylon with bolts and nuts
microphone stand with boom max height 165cm, black
microphone stand, telesc.boom, black, max height 165cm
microphone stand, with boom, black, max height 100cm
microphone stand, telesc.boom, black, max height 50cm
microphone stand, with boom, black, maximum height 25cm
microphone stand with round base, black, max height 160cm
microphone arm, fully flexible, with table mount clamp
microphone arm, fully flexible, with table mount clamp
spare part, swivel nut M7 with grip axle, chrome also for music stand OMS-302
spare part, plastic cable clamp fits boom (15mm)
spare part, plastic cable clamp fits stand (20mm)
spare part, clamp collar for microphone stand
spare part, bolt with nylon head, M6 x 13mm
spare part, bolt with nylon head, M6 x 20mm
spare part, bolt with nylon head, M6 x 27mm
spare part, rubber foot, 20mm inner diameter
spare part, bolt with nylon head, M6 x 23mm
microphone stand, with boom, black
universal tablet holder for stand, fits tube dia 25.4mm, with 360° spring loaded clamping system
desk top microphone stand, round base, with gooseneck 36cm
desk top microphone stand, round base, height adjustable
mic stand thread adapter, 12 pcs 3/8 female to 5/8 male
mic stand thread adapter, 3/8 female to 5/8 male with grip ring
microphone stand adaptor, black, bolt clamp, 5/8" thread, length 26,4 cm.
microphone stand adaptor, black, t-adaptor, 2x 5/8" thread
gooseneck, chrome, 15cm
gooseneck, chrome, 25cm
gooseneck, chrome, 35cm
gooseneck, chrome, 50cm
metal stand for GAN-12 /A/A-MP in monitor position
speaker stand, for monitors, adjustable heights, 83-91-99-107-115cm
speaker stand, 200cm max height, steel
